Podium wheels are mounted with 6 M5x25mm screws. You can use the original Fanatec screws.

All wheels have countersunk holes and screws, you can use the original Fanatec hardware.

The wheel is directly mounted to the hub.

The wheel is directly mounted to the hub.

ClubSport wheels are mounted with 6 M5x12mm screws. You can use the original Fanatec srews.

Steel wheel have countersunk holes and screws.

All Button Cluster are mounted with the screws of the wheel.

The long brakets on the upper cluster.

Attention: don’t forget the spacer for the upper center screws.

Button Cluster Layout:

The upper brakets are mounted direclty to the hub.

Use your the wheel as template for the position.

The long brakets on the upper cluster.

Attention: don’t forget the spacer for the upper 3 screws.

Button Cluster Layout:

If your grips get loose you can tighten them easy with a 2mm hex key.

Put the key through the small hole on the backside of your wheel. The grips are build strong, but don’t use any powertools.

If you need a good quality hex key, you can get it here

Use a cleaner for car interior.

Spray the cleaner on a clean microfiber towl and clean your grips. Let them dry a few minutes.